Charnwood 100/50RC Hose Reducer 100mm to 50mm (4" to 2")


Price:
Sale price£6.00
Stock:
In stock (4 units), ready to be shipped

Pickup available at Saint Botolph's Lane

Usually ready in 1 hour

Description

Used for stepping down or up in hose size and used for connecting a hose line to machinery with a different sized outlet.

The table shows the outside diameter, OD, and the inside diameter, ID, for each end of the connector.

It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted.Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a minimum. A 100mm hose clamp should be used to fasten the hose the reducer.
Used for stepping down or up in hose size and used for connecting a hose line to machinery with a different sized outlet.

This reducer can be used to step down in hose size from 100mm to 50mm.
 

  OD ID
From 100mm 93mm
To 50mm 45mm

Estimate shipping

You may also like

Recently viewed