Description
Frame assembly kit which can be used to assemble any mitred, 4 sided frame.
The heart of this kit is the mitre clamp, which is made from aluminium. The clamp has quick action jaws which securely hold the 2 mitred pieces during pinning. The clamp and frame is then flipped over to allow access to the underside of the frame. Minimum sized frame 150mm x 150mm inside the rebate.
Once hung on the wall the underside will never be seen. A wedge is then fitted to the retracting end of the driver. It is magnetic to make things simple. Then use a hammer (not supplied) to tap the wedge into the moulding underside.
Included in the kit:
- Metal Mitre clamp for accurate tight mitres
- Magnetic tipped V-nail driver (use your own hammer)
- 165 piece hardware kit for finishing & hanging the frame
- Spirit level for leveling frames on the wall
A hardware kit is also included to help finish off the frame and prepare for hanging.
Hardware kit contains:
- 5 metres of picture hanging wire
- 100 x 10mm Wedges
- 8 screw rings
- 8 screw eyes
- 20 wall nails
- 10 brass screws
- 8 D-rings
- 6 large picture hooks
- 4 small picture hooks.